I wanted to have a place for parties and just to kick back with friends. So what better way to accomplish this than build a new martini bar. After looking in the stores out there I didn't find a table that I liked. We decided the only way to get one that fit our needs we would have to build our own.

This hood is really almost too small. It is so tight and really hard for me to breathe. I had to concentrate on the breathing to get enough air. Also I never expected that the gas mask would follow. I really didn't know that I would get to find out just how long I could hold my breath.

This is a set from the last time Vanessa came out to visit us from California. Vanessa was fairly new to the kink world and at the time she had only begun to experiment with bondage and during her visit she had asked Michael to tie her up. Of course since that is what we do here she didn't have to ask him twice. By the end of her visit she found that not only is it fun to be tied but it is also very rewarding to be a little more dominate.

I was surprised at first by the way two simple sticks bound together could be so restrictive. To start I basically went to the hardware store and purchased some closet rods. Once wrapped to them with the pallet wrap and then further secured with additional wrap over the top it was impossible to move a muscle.

I was on vacation and the hotel room had a tall lamp like this and I am not sure what started the process but in my dream I was attached to the lamp for the night. I told the guys about the dream and they decided to do something about it. With a little modification. X-10 Controlled Dimmer and Radio Frequency Remote. I had the perfect bedside light.

This is the Second part of the Pussy Pump. The first half featured the Idea and construction of the new toy. In this half I get to try it out. The idea actually came from one of those little train cars the track workers use to get to and from the work site in days gone. (Gandy Dancer) the men used to pump the lever to drive the cart down the rails and I had thought it would be fun to somehow connect something like that to a girl for orgasm power.

I get E-mails all the time from all of you who really enjoy the behind the scenes things that go on. So I decided to put up quite a bit of it this week. When new devices are dreamed up it can sometimes be a lot of work to bring it to reality. When working on things that could be potentially dangerous. It is always important to carefully plan and test everything before doing a shoot. This Gallery will kind of show some of the work that goes into every custom device on my site.

I took a trip out to L.A. a few months ago and met up with Eden Wells. She had a great Studio and a lot of really fun toys to try out. I was so excited to find out that she also had borrowed this really great Fucking Machine from a friend.

My arms and legs are wrapped in vet wrap so that I can't move. Then a set of electrical breast cups are vet wrapped on me with the tens unit turned up while I am being fucked with the dildo stick.

I was tied super tight with no hope of ever being able to escape. My wrists were tied out to my knees and my elbows were tied to my waist. It forced my legs open and I was forced to remain on my stomach with no way to flip over or relieve the strain on my body.

I go at this thing for the first time. In case you didn't catch the last set yet. Let me fill you in on the deal. The platform has micro switches in it in case I decide to step off I will be electrified with the tens. The three pillars of laser light create a field of light which will surround me on all sides. If the light field is interrupted or broken. I get zapped. Finally if the attached cord on by back unplugs because I move too far from the device I get shocked until someone else reattaches me.

This is the development of the device and the testing as well as a getting ready set of images. The next update will feature the pictures of me installed on the wonderful stand. The diagram shows the concept behind my new toy. It is basically a series of laser diodes and receivers. 60 diodes to be exact. Each one projects a beam to a receiver. If the beam doesn't make it to the receiver the circuit is not complete. If I break the light field or step off of the pressure sensitive platform I will be shocked by the TENS continuously until I return to the Pad and I am no longer blocking the Light beams surrounding me.

I try out a new device which allows a person to lock themself spreadeagle to a bed with no way out. I really enjoy tying myself up and waiting for someone to come and find me. When you do this type of thing make sure someone you can trust knows your plan in case of an emergency they can help you if the person you are waiting for has an accident or doesn't make it to help you. Also they should be close to monitor the overall event. On the device itself. When I was completely ready I gave the chain on my wrist a really good jerk and snap. I wasn't in the middle of the bed and the weight turning the wheel and pulling in the chain dragged my helpless body tight and snatched my arm out to the corner of the bed.

For this set I thought it would be a good idea to show some other uses for the cage rather than just being locked helplessly inside. The first picture shows a new last minute addition. When I mentioned I wanted to be tied to the outside we decided it would be a nice touch to raise the bar a little for me. Who wants to see a girl tied to a cage sitting there doing nothing? So with a little scrap metal from the cage construction project you get an adjustable Pussy Torture Device.

This week I decided to do a cage. Of course we had to build one first. So that is where we start. I thought I wanted this size. The cage is 24 x 30 x 36. I wish I would have had him build it 1/2 of the size. The process is pretty interesting. I thought you might enjoy seeing the pictures I took of it as well as my first 5 hours locked inside.

The gear in the update was produced by the one and only Ledermeister. I want to take a minute to tell him thank you for everything. One thing to note Sarah wanted to make sure this armbinder was extra tight so she actually spent a lot of time making sure I wasn't going to even wiggle my arms. Then she attached the serving tray that we made here. It was a little tight around the waist but then again I didn't want to be punished for spilling her drink.

Here is the final part of my fun. I saved the best for last. We recently picked up a welder and we decided to start simple and make this stand and with a few simple modifications it held me in place perfectly. Along with my Ledermeister Single glove.

I was actually amazed that these little things actually worked so well. I made a bet that they couldn't hold me down. So I thought. No matter how hard I pulled I could barley move and the Anchors didn't budge. My bet did come at a cost though. I was left there for about 2 or 3 hours and by that time I needed to get out of there since I did start to burn a little in the sun.

I combined both of my favorite fetish items to make this set. My shiny latex cat suit and My ledermeister arm binder and leather hood. I really liked how the pictures looked and wanted to share them with you.

I love the mountains and I love the outdoors. and since the water is still to cold to have fun at the lake I thought it would be a good day to start the hiking season. Of course anytime I take a trip here I prefer to be shackled so that I won't run off :)